Welcome to LJS TECH(HK) WebSite
CONTACT US
CONTACT US

Tel: 0086-755-83266775

Fax: 0086-755-83987123

Info@worlduniqueen.com

CONTACT US CONTACT US CONTACT US CONTACT US

Company profileCurrent location: Home > News center> How to use DMX512 controllers ( master/console, decoder ,etc.) to control led light
How to use DMX512 controllers ( master/console, decoder ,etc.) to control led light
Release time :2017-06-01
Share to:

DMX512 series always is used in high-end place for decorations, like stage, par.

It can achieve high precision, high efficiency and wide range control.

Using the international common DMX512 / 1990 protocol, can achieve a large number of real-time lighting control.

Even in some occasions ,you can use the PC soft to control the stage light.

When you use the mater and decoder to connect the light, or use the built-in decoder stage light, you should know how it work ,and how to set the address:

> every decoder/ built-in decoder lamp has a start address ,during 1-512, due to the channels of the light, it owns the following several addresses,

For example: the first address is 15, the light has 4 CH, it own the 15,16,17,18 address.

> The address can be repeated.

> The default address of every decoder is 1.

> No mater the order of the decoders ,it will just control the light by DMX address, regardless of installation order.

> The address can be calc. as plus the address code:

For example: when 1,2 is switched, the address is 3(=1+2).

          When 1,2,4 is switched, the address is 7(=1+2+4)

          When 2,4 is switched, the address is 6(=2+4)